More Control. More Creativity. More LX+

The Impact LX49+ and LX61+ USB MIDI controller keyboards are jam-packed with intelligent and expressive performance control not even available on many premium products. Ever wanted a MIDI controller that hooks up automatically to your DAW? Impact LX49+ and LX61+ do exactly that.

Nektar DAW Integration custom designed for Bitwig, Cubase, Cakewalk, Digital Performer, FL Studio, GarageBand, Logic Pro, Nuendo, Reaper, Reason and Studio One takes Impact LX+ way beyond functionality normally offered by a USB MIDI controller keyboard. With Impact LX+ the hard work is done, so you can focus on your creativity.

IMPACT LX+ MIDI CONTROLLER KEYBOARD

The 49 or 61 note velocity sensitive keyboard is a synth action with a medium tension. With 4 velocity curves gradually increasing in dynamics there is a choice for any playing style. If you don’t need velocity, 3 fixed velocity levels cater for a consistent output. Octave and transpose buttons as well as pitch bend and modulation wheels are within reach, so you can quickly shift the keyboard up or down an octave or semitone or apply additional articulation with the wheels.

OCTAVE & TRANSPOSE BUTTONS

There is more to the 4 Octave & Transpose buttons than meets the eye. 4 functions are selectable on the fly so you can make important changes at any time, even while you play. A key combination makes assignment quick and easy. Choices include sending out MIDI Program Messages, change the Global MIDI Channel or select any of Impact LX+’s 5 user presets with either the Octave or Transpose buttons.

CONTROL CENTER

Nine 30mm faders, 9 MIDI buttons and 8 encoders are at the center of the Impact LX49+ and LX61+ control panel. Each control is fully MIDI programmable to send any MIDI CC message for use with hardware or software MIDI products. Used with Nektar DAW integration, the controls take on a life of their own, providing flexible pre-mapped DAW control giving you the best of both worlds. All MIDI controller settings can be stored in any of the 5 Impact LX+ presets for recall at any time. And if you switch Null on, any parameter values are stored when you change presets so you avoid parameter jumping.

PADS

For groove and beat creation, Impact LX’+s 8 velocity sensitive pads make life easy. Calibrated to trigger at a light touch, finger drumming is suddenly well within reach with a nice and even velocity response. Each pad can be assigned any MIDI note number or MIDI cc message for use as MIDI trigger or toggle buttons. But the best part is the “Pad Learn“ feature, which allows you to just select a pad, play the note or drum sound you want on the keyboard and assignment is done. No complex menus for a task that’s essential to getting the most out of your pads. Assignments are stored over power cycling so you don’t lose your settings when you switch your system off for the night. In addition, 4 pad map locations can store your settings for future recall.

blank
The 4 color LED illumination not only looks good but also indicate which pad map is currently loaded and can even tell you which type of MIDI message each pad sends. With Nektar DAW Integration, the pads are automatically mapped in for example Reason and Bitwig.. The two Clips and Scenes buttons are used in Bitwig  to trigger…., Clips and Scenes. In Reason, a clever control of Reason’s location points create a similar experience with scenes triggering of any Reason song.

NEKTAR DAW INTEGRATION

Impact LX49+ and LX61+ software DAW integration sets it apart from other MIDI controllers. We write our own DAW integration and therefore are able to optimize interaction with your DAW and ensure supports for most of the popular DAWs. A common workflow gives access to many of the functions you are most likely to need when recording and performing with your Impact LX+. The best part is that it’s all done for you: Simply complete the installation process and start making music! Impact LX+ DAW integration currently supports Bitwig, Cakewalk, Cubase, Digital Performer, FL Studio, Garageband, Logic, Nuendo, Reaper, Reason and Studio One. Buttons and controls are labeled so you don’t have to remember how they are assigned. That’s why Impact LX+ is a breeze to use but with enough extra features under the hood to challenge even the most experienced power user.

Impact GX MINI Daw Support Logos

TRANSPORT & NAVIGATION

Six dedicated transport buttons are always within reach and mapped to control Cycle, Rewind, Forward, Stop, Play and Record. Press Shift to get access to alternate functions such as Goto L, Set L, Set R, Undo, Click and Mode. Dedicated Track up/down and Patch up/down buttons are located below the display.

blank

MIXER CONTROL

Press mixer and the first 8 Impact LX+ faders are assigned to control 8 channels of your DAWs mixer. An alternate Bank up/down function moves control assignments to the next or previous group of 8 channels. Importantly, the selected track so the 9th fader is assigned to the currently selected channel so you always know where to find it.

The buttons under the faders follow the channel assignment of their corresponding fader and can control Mute or Solo. Pan for the group of 8 channels controlled by the faders is handled by the 8 pots. Fader 9 is used for control volume of the current mixer channel as well as master volume.

To help you get the best out of your screen real estate, Impact LX also has shortcuts for opening and closing your DAWs mixer window so you can see what’s going on.

INSTRUMENT PRESET

Activating the Instrument button assigns all controls to instrument parameters once an instrument track is selected in your DAW. Nektar mapping ensures this is done automatically, so you can start tweaking immediately. Better still, many devices and plugins are pre-mapped to match the blue control labels on the Impact LX+.

The Page Button

With Nektar DAW Integration, a page button allows you to switch between Default settings and User settings with LEDs clearly indicating which page is active. Each page changes assignments of the 8 pots, leaving the User page for example for your own assignments. Many pre-mapped plugins take advantage of the two pages*. So you could use it for immediate access to both, oscillator 1 and oscillator 2 parameters from the pots, switching between oscillators using the Page button.

In addition, a typical control layout places amp and filter ADSR envelopes on the faders for instant access regardless of whether the Default or User page is selected.

“Grab” and Nektar Maps
The Nektar “Grab” mode allow you to temporarily assign parameters to controls as you work on your project. It’s as easy as holding down shift while moving the parameters on the instrument you want to control followed by moving the controls on Impact LX+ you want them assigned to. Some DAWs even supports saving “grabbed” parameters to a Nektar map* which means you can completely customize your assignments for future use.

* Implementation depends on the DAW. Check how Impact LX+ works with your DAW in the section below.

blank

HOW DOES IMPACT LX+ MAP FOR YOUR DAW?

Click the tab corresponding to your DAW below and learn more.

BITWIG STUDIO

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

TRANSPORT BUTTONS

  • Loop on/off
  • Rewind
  • Forward
  • Stop
  • Play
  • Record
  • Goto Loop start
  • Set Loop Start to current song position
  • Set Loop End to current song position
  • Undo
  • Metronome on/off
  • Overdub on/off

INSTRUMENT

  • Open/close device chain window
  • Navigate devices in device chain even select any of the first 8 devices using buttons 1-8
  • Disable/Enable Devices 1-8
  • Control device volume (Fader 9)
  • Default page maps faders and pots to parameters as per blue control labeling
  • User page maps faders and pots to Bitwig’s Common Parameter Mapping page
  • Preset 1 maps to Macro’s
  • Select any Drum Machine slot by hitting the corresponding pad and control parameters immediately from the pots
  • Select up to 5 Drum Machine banks of 8 slot each, for control and triggering

MIXER

  • Open/Close Mixer lane
  • Group of 8 mixer tracks
  • Volume,
  • Pan
  • Mute
  • Solo
  • Bank over (1-8), (9-16) etc
  • Volume, current track (Fader 9)
  • Master Volume

PADS

  • Open/close the Launcher
  • Dedicated Clips button enable clip triggering from the pads. LED color feedback indicate status such as play, record, empty and not empty
  • Add clips in lenghts of 1,2,4 or 8 bars
  • Delete clips
  • Use pads to select up to 8 banks of clips for a total of 64 clips
  • Dedicated Scenes button enable scene triggering from the Pads. LED feedback indicate which scene is playing
  • Use pads to select up to 8 banks of scenes for a total of 64 scenes

SONAR

TRANSPORT BUTTONS

  • Cycle on/off
  • Rewind by 1 bar
  • Forward by 1 bar
  • Stop
  • Play
  • Record
  • Goto Left locator
  • Set Left locator to current song position
  • Set Right locator to current song position
  • Undo
  • Metronome on/off
  • Record Arm on/off for current track

SOFT-TAKEOVER

  • Eliminates parameter jumping
  • Parameter value only changes when control position matches value
  • Display indicates whether controls should be moved up or down to takeover parameter value

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

INSTRUMENT

  • Open/close VST instrument window
  • Nektar Map System store and recall map settings for VSTi plugins
  • The Default page maps pots to parameters as per blue control labeling
  • User page for secondary mapping or user mapping
  • Faders 1-4 commonly mapped to amp ADSR envelope
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control VSTi Instruments main volume
  • All VSTi mapping is user customizable using Nektar “Grab” function including faders, fader buttons and both page assignments
  • User customization can be either temporary (active for as long a project is open) or saved

MIXER

  • Open/Close Mixer window
  • Control up to 8 channels at a time
  • Volume assigned to faders 1-8
  • Pan assigned to pots
  • Mute controlled by fader buttons
  • Solo
  • Bank over (1-8), (9-16) etc
  • Current track controlled by fader 9
  • Master Volume

CUBASE/NUENDO

TRANSPORT BUTTONS

  • Cycle on/off
  • Rewind by 1 bar
  • Forward by 1 bar
  • Stop
  • Play
  • Record
  • Goto Left locator
  • Set Left locator to current song position
  • Set Right locator to current song position
  • Undo
  • Metronome on/off
  • Quantize during record on/off

SOFT-TAKEOVER

  • Eliminates parameter jumping
  • Parameter value only changes when control position matches value
  • Display indicates whether controls should be moved up or down to takeover parameter value

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

INSTRUMENT

  • Open/close VST instrument window
  • Nektar Map System store and recall map settings for VSTi plugins
  • The Default page maps pots to parameters as per blue control labeling
  • User page for secondary mapping or user mapping
  • Faders 1-4 commonly mapped to amp ADSR envelope
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control VSTi Instruments main volume
  • All VSTi mapping is user customizable using Nektar “Grab” function including faders, fader buttons and both page assignments
  • User customization can be either temporary (active for as long a project is open) or saved

MIXER

  • Open/Close Mixer window
  • Control up to 8 channels at a time
  • Volume assigned to faders 1-8
  • Pan assigned to pots
  • Mute controlled by fader buttons
  • Solo
  • Bank over (1-8), (9-16) etc
  • Current track controlled by fader 9
  • Master Volume
YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

MOTU: DIGITAL PERFORMER

TRANSPORT BUTTONS

  • Memory Cycle on/off
  • Rewind
  • Forward
  • Stop
  • Play
  • Record
  • Goto Memory start
  • Set Memory Start locator to current song position
  • Set Memory End locator to current song position
  • Undo/redo
  • Metronome on/off
  • Overdub on/off

SOFT-TAKEOVER

  • Eliminates parameter jumping
  • Parameter value only changes when control position matches value
  • Display indicates whether controls should be moved up or down to takeover parameter value

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

INSTRUMENT

  • Open/close instrument window
  • Nektar Map System recall map settings for plugins
  • The Default and user page maps pots to parameters as per blue control labeling
  • Faders 1-4 commonly mapped to amp ADSR envelope
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control instruments main volume

MIXER

  • Open/Close Mixer window
  • Control up to 8 channels at a time
  • Volume assigned to faders 1-8
  • Pan assigned to pots
  • Mute controlled by fader buttons
  • Solo
  • Bank over (1-8), (9-16) etc
  • Master Volume

 

IMAGE-LINE: FL STUDIO

TRANSPORT BUTTONS

  • Toggles Pattern and Song Mode
  • Rewind
  • Forward
  • Stop
  • Play
  • Record
  • Goto Left locator
  • Playback slow
  • Playback fast
  • Undo
  • Metronome on/off
  • Close all unfocused windows

NAVIGATION BUTTONS

  • Mixer Track change -/+
  • Channel change -/+

INSTRUMENT

  • Open/close VST instrument window
  • FL Studio default plugins pre-mapped
  • Uses FL Studio override generic control to assign parameters
  • Faders 1-4 commonly mapped to amp ADSR envelope)
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control Instruments main volume

MIXER

  • Open/Close Mixer window
  • 8 Faders, Pots and buttons freely assignable to any channel
  • Control up to 8 channels using FL Studio override generic control
  • Current track volume controlled by fader 9
  • Current track mute controlled by button 9
  • Null mode activate avoids parameter jumping
YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

APPLE GARAGEBAND

TRANSPORT BUTTONS

  • Loop/Cycle on/off
  • Rewind by 1 bar
  • Forward by 1 bar
  • Stop
  • Play
  • Record
  • Return to start
  • Set Left locator to current song position
  • Set Right locator to current song position
  • Undo
  • Metronome on/off

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

INSTRUMENT

  • Open/close VST instrument window
  • Default page maps GarageBands instruments. Mapping as per blue control labeling
  • Faders 1-4 commonly mapped to amp ADSR envelope
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control Instruments main volume

MIXER

  • Open/Close Library pane
  • Control up to 8 channels at a time
  • Volume assigned to faders 1-8
  • Pan assigned to pots
  • Mute controlled by fader buttons
  • Solo
  • Bank over to control more channels (1-8), (9-16) etc
  • Current track controlled by fader 9
  • Master Volume

SMART PANE

  • GarageBands’s Smart Controls can be controlled from Mixer mode
  • The Shift+Page button will open the Smart Control Window
  • Pots control Smart Controls 1-8
  • Faders 1-4 control Smart Controls 9-12
YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

APPLE LOGIC 9 & LOGIC PRO X

TRANSPORT BUTTONS

  • Loop/Cycle on/off
  • Rewind by 1 bar
  • Forward by 1 bar
  • Stop
  • Play
  • Record
  • Return to start
  • Set Left locator to current song position
  • Set Right locator to current song position
  • Undo
  • Metronome on/off
  • Latch automation on/off

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

INSTRUMENT

  • Open/close AU instrument window
  • The User page customizable by user using Logic learn
  • Faders 1-4 commonly mapped to amp ADSR envelope
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control Instruments main volume
  • Enable/disable Arpeggiator using fader button 9
  • Using Logic’s parameter learn function, both the Default and User page can be customized

SCENES/MARKERS

  • Press Scenes to assign pads to markers
  • Pads can trigger up to 8 banks of 8 markers = 64 markers total
  • Select any marker by hitting a pad
  • Current marker illuminated yellow
  • Add a marker at current song position

MIXER

  • Open/Close Logic’s mixer pane
  • Control up to 8 channels at a time
  • Volume assigned to faders 1-8
  • Pan assigned to pots
  • Mute controlled by fader buttons
  • Solo
  • Bank over to control more channels (1-8), (9-16) etc
  • Current track controlled by fader 9
  • Master Volume

SMART PANE

  • Logic Pro X’s Smart Controls can be controlled from Mixer mode
  • The Shift+Page button will open the Smart Control Window
  • Pots control Smart Controls 1-8
  • Faders 1-4 control Smart Controls 9-12

SOFT-TAKEOVER/PICKUP MODE

  • Logic features a Pickup Mode which can be switched on or off
YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

REAPER

TRANSPORT BUTTONS

  • Cycle on/off
  • Rewind by 1 bar
  • Forward by 1 bar
  • Stop
  • Play
  • Record
  • Goto Left loop point
  • Set Left loop point to current song position
  • Set Right loop point to current song position
  • Undo
  • Metronome on/off
  • Toggle Overdub and Replace record modes

SOFT-TAKEOVER

  • Eliminates parameter jumping
  • Parameter value only changes when control position matches value
  • Display indicates whether controls should be moved up or down to takeover parameter value

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

INSTRUMENT

  • Open/close VST instrument window
  • Nektar Map System store and recall map settings for VSTi plugins
  • The Default page maps pots to parameters as per blue control labeling
  • User page for secondary mapping or user mapping
  • Faders 1-4 commonly mapped to amp ADSR envelope
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control VSTi Instruments main volume
  • All VSTi mapping is user customizable using Nektar “Grab” function including faders, fader buttons and both page assignments
  • User customization can be either temporary (active for as long a project is open) or saved

MIXER

  • Open/Close Mixer window
  • Control up to 8 channels at a time
  • Volume assigned to faders 1-8
  • Pan assigned to pots
  • Mute controlled by fader buttons
  • Solo
  • Bank over (1-8), (9-16) etc
  • Current track controlled by fader 9
  • Master Volume

PROPELLERHEAD SOFTWARE: REASON

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

TRANSPORT BUTTONS

  • Loop/Cycle on/off
  • Rewind by 1 bar steps
  • Forward by 1 bar steps
  • Stop
  • Play
  • Record
  • Goto Loop start
  • Set Loop Start to nearest beat 1 position
  • Set Loop End to nearest beat 1 position
  • Undo
  • Metronome on/off
  • Quantize during record on/off

INSTRUMENT

  • Default page maps pots to parameters as per blue control labeling
  • User page maps pots to oscillator 2 parameters as per blue control labeling
  • Faders 1-4 commonly mapped to amp ADSR envelope
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control device main volume
  • Kong and ReDrum pad parameters selected by hitting the corresponding pad and control parameters immediately from the pots
  • Nektar “Grab” mode for temporary assignments

PADS

  • Automatic mapping of Kong and ReDrum pads
  • Real-time switching between pads 1-8 and 9-16
  • Pads show solo and mute status for Kong and ReDrum using LED colors
  • Press Scenes activate a unique scene trigger mode
  • With Scenes active, pressing a pad moves loop points to a specific location in the current song
  • Playback is seamless when moving from one location to another
  • Loop length can be adjusted on the fly

MIXER

  • Control up to 8 channels at a time
  • Volume assigned to faders 1-8
  • Pan assigned to pots
  • Mute controlled by fader buttons
  • Solo controlled by button 9 + fader buttons
  • Bank over to control more channels (1-8), (9-16) etc
  • Current track controlled by fader 9
  • Master Volume

SOFT-TAKEOVER

  • Eliminates parameter jumping
  • Parameter value only changes when control position matches value
  • Display indicates whether controls should be moved up or down to takeover parameter value
YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

PRESONUS STUDIO ONE

TRANSPORT BUTTONS

  • Cycle on/off
  • Rewind by 1 bar
  • Forward by 1 bar
  • Stop
  • Play
  • Record
  • Goto Left locator
  • Set Left locator to current song position
  • Set Right locator to current song position
  • Undo
  • Metronome on/off
  • Quantize selected part or notes

NAVIGATION BUTTONS

  • Track change -/+
  • Patch change -/+

INSTRUMENT

  • Open/close VST instrument window
  • The Default page maps the pots to parameters as per blue control labeling
  • The User page maps pots to additional useful parameters
  • Faders 1-4 commonly mapped to amp ADSR envelope
  • Faders 5-8 commonly mapped to filter ADSR envelope
  • Fader 9 control VSTi Instruments main volume
  • Use Studio One learn to map any plugin
  • Toggle through inserts effects
  • Control insert effects in focus

MIXER

  • Open/Close Mixer window
  • Control up to 8 channels at a time
  • Volume assigned to faders 1-8
  • Pan assigned to pots
  • Mute controlled by fader buttons
  • Solo
  • Bank over (1-8), (9-16) etc
  • Current track controlled by fader 9
  • Master Volume
YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

 

USER PRESETS & PROGRAMMING MIDI

If you mainly want to use your DAW’s MIDI learn features, Impact LX+ is easy to come to grips with.
There are 2 non-overlapping, read-only presets on the Mixer and Instrument buttons so you can quickly switch between independent and unique setups. These presets are also used for Impact LX+’s integrated DAW support.

In addition, 5 user presets are programmed for GM compatible and “learn-friendly” setups plus they can of course be overwritten with your own settings. You for example could set up Impact LX+ for use with Pro Tools or Ableton Live, both of which have limited integration options. Using Impact LX+”s generic MIDI controller capabilities, setups can get you quite far. Here are links to setup examples.
With the Impact LX’s “Null” function switched to on, parameter values are stored when you switch between presets so you avoid parameter jumping.

blank
blank

CONNECTIVITY & APPLE iOS

On the back of Impact LX+ are the connection points including:

USB port for power and data connection to your computer or iPad (via optional USB camera connection kit)
Foot switch jack, assignable (pedal not included)
On/Off switch

As a low powered USB device, Impact LX+ works with all USB devices that feature a Class compliant MIDI driver. This includes all version of Windows from XP and higher, Apple OS X 10.5 and higher plus Linux (as long as a USB MIDI driver package is installed).

And if you are often on the move you can easily hook your Impact LX+ keyboard to an Apple iPad using the iPad’s optional USB camera connection kit (optional). Of course the Impact LX is powered by the iPad so you can work away for as long as your iPad remains charged.

BITWIG STUDIO 8-TRACK INCLUDED

Bitwig 8-Track is included with your Nektar controller so you can start producing, performing, and designing sounds like a pro from day one. Bitwig 8-Track gives you access to over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own, too. The ‘Bitwig Essentials Package’, a highly versatile handpicked selection of loops, clips and samples, is also included to help you get started. So put all that together and you have a powerful sketchpad for your musical ideas featuring the acclaimed workflow of Bitwig Studio.

Nektar DAW Integration supports Bitwig 8-Track, so using Nektar Impact LX+ and Bitwig 8-Track together is a fantastic combination. If you are just starting out, you will find it’s the perfect way to take your first steps in the world of digital music creation. And if you’re already familiar with using computer software, then you’ll be amazed at what this combination has to offer! Read more about Bitwig 8-Track.

 

Bitwig 8-track Arrangement view
Bundle of 5 full Cherry audio plugins included.

FIVE (5) CHERRY AUDIO PLUGINS

No kidding! We are also including 5 Cherry Audio plugins with your purchase. Not 5 demo plugins but full versions that can be loaded in any DAW as well as Bitwig Studio 8-Track. The bundle contains:*

  • Mercury-6 , a model of the classic Jupiter 6 synth.
  • PS-20, inspired by the MS-20.
  • OctaveCat, a n approachable monophonic synth based on the original.
  • DeamSynth, with digital and analog style waveforms akin to products developed in the late 80's/early 90's.
  • Stardust 201, a classic tape echo with all the advantages of digital.

SPECIFICATIONS

Keyboard
  • 49 note (61 on LX61+) velocity-sensitive synth-action keyboard
  • 4 velocity curves + 3 fixed
  • Pitch bend & Modulation wheels
  • Octave shift buttons
  • Transpose shift buttons
Controls
  • 8 potentiometers
  • 9 30mm faders
  • 9 assignable buttons
  • 6 dedicated transport buttons
  • 5 preset locations store control settings
  • Page button (for Nektar DAW Integration only)
  • Nektar DAW Integration for major DAWs
Pads
  • 8 velocity sensitive pads
  • Each pad LED illuminated with 4 color options: Green, Yellow, Orange and Red
  • 4 velocity curves plus 3 fixed
  • Note-learn
  • Pads assignable notes and MIDI cc messages
  • Load or Save to any of 4 pad maps
  • Clips and Scenes LED buttons
Connections
  • 1/4” TS jack foot switch input (MIDI Assignable)
  • USB port on rear panel, and USB bus powered
  • Connects to iPad via Apple Camera Connection Kit (not supplied)
System Requirements
  • USB Class compliant (no driver needed)
  • USB Power Requirement: 500 mA (100 mA in low power mode)
  • Impact LX+:  Apple iOS, Apple OSX 10.5 or higher, Windows XP, or higher, Linux (MIDI driver software required)
  • Nektar DAW Integration: Mac OS X 10.7 or higher, Windows Vista, 7 & 8 or higher
Nektar DAW Integration

Mac OS X 10.7 or higher, Windows Vista, 7 & 8 or higher

Dimensions & Weight

LX49+: 31 5/8″(L) x 10 1/2″(D) 3 “(H), 7 Lbs

LX61+: 38″(L) x 10 1/2″(D) 3 “(H), 9 Lbs